WALL
All kinds and sizes of Tiles, Marbles, Granites and Slates.
20kg
Spread the adhesive on floor (at 6mm thick). Using suitable steel notch trowel, (Not more than 1 sq. metre a time) press the tile / stone firmly in to the positions with a slightly twisting action and use suitable rubber mallet for gentle tamping. Use spacer of required size to maintain the uniform joint width (joint gaps of at least of 3mm shall be provided to facilitate movement) Tile / Stone have to be fixed within 20 min and can be adjusted up to 15-20 min. Touch the ribs of the applied adhesive periodically, if skin has formed; replace the dry adhesive with fresh adhesive. Periodically make sure that the tile / stone are 100% adhesion with adhesive. After fixing the tile stone, excess adhesive on faces and at joints has to be cleaned periodically.
Mix the powder with clean water in ratio of (by weight) 4:1 until a lump free smooth paste of uniform mix is obtained using heavy duty slow speed (less than 300 rpm) electrical drilling machine with spiral paddle attached. Thus, obtained mix has 3hrs of pot life.
Approximately 40 to 50 sqft per 20kg bag with 6mm bed thickness. Usage requirement are approximate only. Coverage will depend on the trowel used and the condition of the sub-floor.
Bed Thickness | Pot life | Open Time | Setting Time | Temperature Resistance | Tensile Adhesion |
---|---|---|---|---|---|
3-6 mm | 3 Hours | 15-20 mins | 24 Hours | 300 to 1500°C | 1.50 kN @ dry conditions |
FLOOR
All kinds and sizes of Tiles, Marbles, Granites and Slates.
20kg
Spread the adhesive on floor (at 6mm thick). Using suitable steel notch trowel, (Not more than 1 sq. metre a time) press the tile / stone firmly in to the positions with a slightly twisting action and use suitable rubber mallet for gentle tamping. Use spacer of required size to maintain the uniform joint width (joint gaps of at least of 3mm shall be provided to facilitate movement) Tile / Stone have to be fixed within 20 min and can be adjusted up to 15-20 min. Touch the ribs of the applied adhesive periodically, if skin has formed; replace the dry adhesive with fresh adhesive. Periodically make sure that the tile / stone are 100% adhesion with adhesive. After fixing the tile stone, excess adhesive on faces and at joints has to be cleaned periodically.
Mix the powder with clean water in ratio of (by weight) 4:1 until a lump free smooth paste of uniform mix is obtained using heavy duty slow speed (less than 300 rpm) electrical drilling machine with spiral paddle attached. Thus, obtained mix has 3hrs of pot life.
Approximately 40 to 50 sqft per 20kg bag with 6mm bed thickness. Usage requirement are approximate only. Coverage will depend on the trowel used and the condition of the sub-floor.
Bed Thickness | Pot life | Open Time | Setting Time | Temperature Resistance | Tensile Adhesion |
---|---|---|---|---|---|
3-6 mm | 3 Hours | 15-20 mins | 24 Hours | 300 to 1500°C | 1.30 kN @ dry conditions |